99% Isopropyl Alcohol Anhydrous (IPA)
General all-purpose cleaner
Safe on plastics
99.9 Percent pure anhydrous
NSF - Nonfood Compounds Program Listed K2, NSF Registration #144030
Isopropyl Alcohol (IPA) liquid is a high purity, multipurpose cleaner and solvent. The purity level meets Grade A standard for MIL Spec TT-I-735A and ASTM D770, ensuring that no contamination occurs from its use. As a cleaner, it is fully miscible in water and most organic fluids, making it good at dissolving dirt, light organic contaminants, and ionic flux residues. Since the 824 is highly anhydrous (without water) and hygroscopic (absorbs humidity), it readily scavenges water off surfaces, trapping the water in the IPA solution as an azeotropic mixture. This helps to dehumidify surfaces. As a solvent, it acts as a moderate evaporation, ‘plastic safe’ diluent and is used to improve the properties of paint resins and other heterogeneous solid mixtures. Therefore, it serves as a useful carrier solvent to adjust the rheological properties and compatibilities of complex mixtures. Due to IPA’s volatility, it resists entrapment in the coating. As it dries, it gives off a very light odor, which is not bothersome but serves as a cue to limit over-exposure due to poor ventilation. Applications & Usages Since Isopropyl Alcohol is safe for most plastics, seals, ceramics, and printed circuit board components, it is used heavily in the electronics industry. It is great for cleaning screens, stencils, fiber optics, cables, keypads, printed circuit board components, or electrical contacts and connectors. It is also used to clean oxides and grime on audio or video tape heads. It effectively removes light greases, oils, and flux without adding additional residues to contacts, relays, and circuit boards connectors. It is quick drying relative to water. Further, it can be used to wash off more aggressive organic solvents like acetone or toluene. Liquid Isopropyl Alcohol general all-purpose cleaner. Safe on plastics. 99.9 Percent pure anhydrous. Meets Mil. spec. #TT-1-735A. For use on: PC boards, connectors and contacts, fiber optics, semi-conductors, printed circuit boards, tape heads, light oils, office and medical equipment, relays, flux. Color: Clear. Purity: 99.9 percent by weight. Refract. Index: 1.3766 (20 C.). Water: 0.01 percent by weight. Specific gravity: 0.7832 (25/25 C). Nonvol: 0.0 mg/50mL. Titratable acid: 0.13mL 02nNaOH. Size: 945mL bottle. RoHS Compliant.
Highly flammable liquid and vapor.
Keep container tightly closed.
Use in ventilated area.
Keep out of reach of children.
Keep away from heat, spark, electrical, fire or flame.
For external use only.
In case of fire: Use dry chemical, carbon dioxide, chemical foam, or water spray to extinguish.
If on Skin or Hair: Rinse with water.
Repeated exposure may cause skin dryness or cracking.
If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention.
If Inhaled: Remove person to fresh air and keep comfortable for breathing. Call a Poison Center if problems persist.
Handling and Storage:
Prevention- Keep away from heat/sparks/open flames/hot surfaces. No smoking. For metal containers, ground/bond container and receiving equipment. Take precautionary measures against static discharge. Use explosion proof electrical/ventilating/lighting equipment. Avoid breathing mist/vapors. Use only outdoors or in well-ventilated area. In cases of inadequate ventilation wear respiratory protection. Keep container tightly closed.
Handling- Wear protective gloves/protective clothing/eye protection. Wash hands thoroughly after handling.
Storage- Store in a well-ventilated area. Keep cool. Store locked up.