Summer Fun Essential Oil Diffuser Blend

Posted by on 7/21/2016 to DIY Ideas with Essential Oils
Summer Fun Essential Oil Aromatherapy Diffuser Blend

5 parts Lemongrass Oil
4 parts Orange Oil

Mix all together and then put a few drops in your ultrasonic diffuser or attach the bottle to your atomizing diffuser and enjoy some summer fun!

AromaSens Essential Oil Diffuser

The AromaSens diffuser uses ultrasonic technology which converts the oil and water under high frequency vibration into a fine cold mist. This mist is then diffused throughout the entire room creating a natural spa-like atmosphere. No heat, chemicals, or pump needed. The AromaSens Ultrasonic Aromatherapy water diffuser is easy to use, safe and silent. The AromaSene comes with a calming  light that can be turned off at anythime, Offers high or low output, continous run time or you can have the diffusers run for 1 or 2 hours and then shuts off.  The AromaSence also has a digitally controlled auto shut-off when water level drops too low. 

Features of the AromaSens Ultrasonic Diffuser
Easy to use, safe and silent.
Cool Mist technology that is generated by ultrasonic waves.
Auto Detection circuit will turn the unit off if it detects any trouble.
Digitally programmed to stop automatically when the minimum water level is reached.
Led lights can be turned on or off.
Output can be set to high or low
Unit will hold up to 5oz of water and will run up to 5 hours + contentiously.
Diffuser can be set to run for 1 to 2 hours or continually until water level is reached.   

1. Remove the cover and the nozzle. 
2. Fill the water tank with a minimum of 50 ml (1.7 oz.) to a maximum 150 ml (5 oz.) of water (see maximum waterfill line).
3. Add 3 to 5 drops of your favorite essential oil to the water and replace the nozzle first and then the cover.
4. Dry hands and plug the power supply into the side of unit. Plug the adaptor into a standard household outlet. 
5. Push the middle button to turn the unit “ON”. • The unit will turn “ON” on CONTINUOUS mode, with the fan on High. • If the button is pressed a SECOND time, the fan will run on the LOW setting. • If pressed a 3rd time the unit will shut off. 
6. Preferred TIME setting button is on the right. • The unit will turn “ON” on CONTINUOUS mode. • Press Timer Button once for 1 hour run time. • Press twice for 2 hour run time.
7. The LED lights turn “ON” with the unit. Use Light Button to turn lights “ON” or “OFF”.
8. The unit will automatically stop once the water reaches the Minimum Water Level. 

Add Comment