FAQ


Contact us

Email:
            support@diffuserworld.com

                       repairs@diffuserworld.com
Phone:            855-276-6277 Mon-Fri / 9am-5pm MST
                       x1 Customer Service / Sales
                       x1 Affiliates
                       x3 Returns / Repairs / RMA
                       x4 Wholesale / Online Reseller
                       x5 Accounting
                       x6 International Resellers
Address:         4219 N Hwy 91, Suite 1, Enoch, Utah 84721-9646
Live Chat:       http://diffuserworld.com/ Mon-Fri / 9am-5pm MST

Which Diffuser Is Best For Me?

What Is The Difference Between Atomizing, Heat, Fan, Vaporizing, and  Diffusers?

A diffuser is any device which allows a liquid to evaporate thereby putting a scent into the surrounding environment. If all you want to do is provide a pleasant scent to your environment, any diffuser will work fine. But if you want to use essential oils for their maximum natural qualities and powerful benefit, only an atomizing diffuser will do the job 100% effectively.  

The process of diffusion is typically accomplished in FOUR ways:

1) Atomization / Nebulization - This new technology uses a cold air pump to force essential oil molecules through an atomizer and into very tiny particles; these atomized molecules become a micro fine vapor that float through the air and keep your environment therapeutically rich for extended periods of time.  You can find atomizing diffusers at http://diffuserworld.com/Atomizing-Diffusers_c_1.html
     Pros: Atomization is absolutely the best way to provide both aroma and retain natural properties with essential oils because it does not alter the chemical composition of the oils. It breaks down pure essential oil molecules without separation of the mixture. It produces a particle size small enough for the lungs and body to absorb them rapidly. Most are equipped with built-in timers and pressure output controls for full control over the oil consumption. No method of diffusing is as effective in preserving the natural healing qualities of essential oils. 
     Cons: Units can be more expensive as it is more costly to create a steady pressurized air flow than to create heat or to rotate a fan. The powerful cold air jet technology is not silent.

2) Vaporization / Humidification - By using water and essential oil mixed together, a mist can be formed which will fill the air. This mist is produced through ultrasonic waves assisted with a fan to force the mist into the environment. You can find vaporizing diffusers at http://diffuserworld.com/Vaporizing-Diffusers_c_7.html.
     Pros: Humidification alone has many benefits especially in dry climates. Also, the negative ions in the water vapor can help filter the air. Using vaporization with essential oils will produce a nice scent in an average sized room. Many vaporizers are equipped with colorful lighting, and a variety of timer options, and are whisper quiet. Essential oil usage is minimal. 
     Cons: Humidification can be undesirable in high-humidity climates. It is a less effective way to provide aromatherapy because the majority of the mist is water vapor which quickly drops from the air. Most vaporizers will only run up to five hours on a single filling. Condensation can build up on surfaces around the unit. Units need to be cleaned often. Units are typically imported and have short warranty periods.

3) Heat - By applying heat, either through burning a candle, or by electricity, the increased temperature will cause the essential oil to evaporate into the air releasing an aroma.
     Pros: Heat will gently produce a scent and fill a room nicely with only a minimum amount of essential oil. Most are economically priced.
     Cons: Heat has two drawbacks. First, it tends to alter the chemical composition of the essential oil which can destroy its purity. Second, it may not be as effective because the size and availability of breathable molecules are mostly filtered out by the nose hairs and nasal cavity. Units are typically imported and have short warranty periods.

4) Fan / Ventilation - By utilizing a small fan to create airflow, evaporation is achieved when air passes over a wick or absorbent pad which holds the essential oil.
     Pros: Ventilation offers an economical and simple way to provide evaporation. Since there is no heat involved, the chemical composition of the essential oil remains intact. Ventilation is a good way to scent a room as long as it’s not too large. Oil usage is minimal. Units are typically economically priced.
     Cons: Aroma has limited reach. The minimal size and availability of breathable molecules compromises therapeutic benefits. Units are typically imported and have short warranty periods
.

Product Feature Inquiries

  • Do I add water? Only our vaporizer diffuser systems use water. 
  • How do I set the timers? The ON TIME and OFF TIME dials have a minimum length of 2 minutes and a maximum length 20 minutes and will repeat indefinitely until the unit it is manually powered off.
  • What kind of oil do I use? Our diffuser systems are designed for 100% pure essential oils. Some pure essential oils are thick and resinous by nature so running a thin essential oil like lemon or orange, or mixing a thinner oil with the thicker oils will keep these units from getting clogged. You cannot hurt your diffuser, so feel free to experiment.
  • Can I use smaller oil bottles on the atomizer? Yes, smaller bottles with the same collar size will work on the atomizer, but the straw may be too long. You can clip the straw to the correct length (cut on a slight angle). It is recommended you buy additional atomizers to accommodate straw length and to minimize blending of oils.   
  • Can I use larger oil bottles on the atomizer? Yes, larger bottles with the same collar size will work on the atomizer, but the straw may be too short.  It is recommended you buy additional atomizers to accommodate straw length and to minimize blending of oils. For the Aroma-Ace we offer a 30ML bottle and atomizer. For the Aroma-Breeze, Aroma-Whisper, and Scent Master 5000 we have abailable the 8oz, 16oz, and 32oz bottles. They will not need a bottle stand as they will stand by themselves.
  • How many square feet does it cover? The Aroma-Ace™, Aroma-Whisper™, and Aroma-Breeze™are rated at 1500-1800 square feet. Factors such as type of oil being diffused, air movement, air exchanges, as well as your definition of coverage, may cause slight variations in actual coverage. The vaporizing and fan diffusers cover 300-500 SF.
  • What kind of oil do I use? Our diffuser systems are designed for 100% pure essential oils. Some pure essential oils are thick and resinous by nature so running a thin oil like lemon or orange, or mixing a thinner oil with the thicker oils will keep these units from getting clogged. You cannot hurt your diffuser, so feel free to experiment.
  • Will it hurt my atomizing diffuser if it runs when the oil bottle is empty? No. The cold air jet pump will just continue to pump cold air through the unit.
  • Do you have a 12 Volt / DC system? Yes. The new Aroma-Ace™12V . It is fit with an adapter for use in multiple countries, at any voltage, at any frequency, and still runs at full capacity.The pump in the current Aroma-Ace™ is made to run on 60HZ. They can run on 50HZ, but it could shorten the life of the pump and will not supply full output.
  • Do you have a three-prong grounded plug unit? The commercial unit, Scent Master 5000™ is our only system with a three-prong grounded plug. There are no plans to convert any of our other models.  
  • Do you have a commercial unit? Yes, the Scent Master 5000™. This unit is a larger fan-forced atomizer that will hold up to a 32 oz bottle. Oil output is approximately 3.0-3.5 ml an hour. It is rated at 5,000-10,000 sf of coverage depending on the air exchange rate. It comes complete with a three-prong grounded plug. It can also be fitted to HVAC systems. The Aroma-Ace™ is also a commercial grade diffuser that can easily and conveniently bring spa-quality therapeutic aromatherapy to your office, hotel room, or anywhere that you wish.
  • What about electrical certifications (ETL / PSE)? Currently, all our products meet Electrical Certification requirements. ETL Certification allows our products to be used in medical facilities and hospitals. The adapter for the 12V Aroma-Ace™ is now UL Certified. The PSE Certification for Japan (Aroma-Ace) is complete. For more specific information on the electrical certification of each of our products, contact support@diffuserworld.com, or call 855-276-6277 x1.
  • Do you use materials that contain BPA? Our products do not contain BPA. We manufacture with polypropylene (PP).
  • Do you sell travel diffusers? The Aroma On The Go™ diffuser can plug into a car cigarette lighter and is activated by a warming pad. The Aroma-Crystal™ is an innovative new technology for diffusing essential oils using a high frequency Piezo crystal. This diffuser can be plugged into any USB port and delivers hours of micro-fine bursts of aromatic vapor without the use of heat or water. This technology is silent and inconspicuous, and can diffuse effectively in a work space or vehicle equipped with a USB port or 12V/USB converter plug. This simple yet stylish design can be carried in your pocket and will not spill if tipped upside down. The Aroma-Sidekick™ is also a portable option as it comes complete with a USB plug.
  • Are your diffusers American made? Diffuser World is the leading manufacturer of high quality atomizing diffusers and designs, engineers and manufactures in Enoch, Utah, U.S.A. Diffuser World also distributes other popular brands that are manufactured in Canada, Hong Kong, Taiwan, Japan and China.
  • How do I convert oil sizes from ounces to milliliters (ML)? There are 15 ML in a half ounce. There are 30 ML in one ounce. For more conversions, check out http://www.onlineconversion.com.

Use and Care

Cleaning Guide By Product: Diffuser World's diffusers are the most "easy to clean" diffuser systems on the market. For cleaning instructions, find your diffuser below:

AROMA-ACE™
AROMA-WHISPER™
AROMA-BREEZE™

  • Quick-Clean: If you feel there could be an oil clog, then a "quick-clean" can fix the problem. Pour a little alcohol (Rubbing, Vodka, Ever-Clear) in an empty essential oil bottle and diffuse for a couple of minutes in a well ventilated area. You can also diffuse orange or lemon essential oils as they are natural cleaners.
  • Deep-Clean: To "deep-clean", first remove the atomizer attachment from its base. The oil clogs develop in the atomizer attachment, usually in the straw. Twist off the essential oil bottle. NEVER try to remove the straw piece in the atomizer attachment. Immerse the atomizer attachment in alcohol (Rubbing, Vodka, Ever-Clear). Let the atomizer attachment remain completely immersed in alcohol for some time depending on the thickness of the oil or resin build up, generally ten minutes. This will clean the build up and will not harm the diffuser. Rinse with warm water.
  • Clog Prevention/Maintenance: Run a "quick-clean" between each oil change or refill.
  • Warnings: If oil is leaking from ANY part of the unit, turn it off and start the RMA process so we can repair the diffuser. Do not set on any surface that can be damaged by essential oils. Only use in an upright position. Do not tilt unit with the essential oil bottle or atomizer attached. Remove bottle and atomizer attachment before transporting. If you feel the diffuser needs to be repaired, please refer to our RMA instructions or contact us at returns@diffuserworld.com 855-276-6277 x3.

AROMA-PRO™

  • Quick-Clean: If you feel there could be an oil clog, then a "quick-clean" can fix the problem. Pour a little alcohol (Rubbing, Vodka, Ever-Clear) in an empty essential oil bottle and diffuse for a couple of minutes in a well ventilated area. You can also diffuse orange or lemon essential oil as they are natural cleaners. Other options are running the anodized well and glass piece through the dishwasher, or clean by hand with hot, soapy water.
  • Deep-Clean:  If oil has left a thick resin, let the well sit for 5 to 10 minutes in alcohol (Rubbing, Vodka, Ever-Clear). Also, give the silver cap a twist and poke a fine needle in the hole being sure to reach the second hole.
  • Clog Prevention/Maintenance: Run a "quick-clean" between each essential oil change or refill.
  • Warnings: Do not set on any surface that can be damaged by essential oils. Only use in an upright position. If you feel the diffuser needs to be repaired, please refer to our RMA instructions or contact us at returns@diffuserworld.com 855-276-6277 x3.

AROMA-GLOBE™

  • Quick-Clean:  First, add a little alcohol (Rubbing, Vodka, Ever-Clear) to the glass bulb and diffuse for a few minutes in a well ventilated area. To remove the glass you must be very gentle to not harm the rubber piece in the base.
  • Clog Prevention/Maintenance: This is a very fragile diffuser and preventing clogs is very important. Run a "quick-clean" between each essential oil change or refill. We also suggest you diffuse thin essential oils like lemon or orange frequently as they are natural cleaners.
  • Warnings: Do not set on any surface that can be damaged by essential oils. Only use in an upright position. If you feel the diffuser needs to be repaired, please refer to our RMA instructions or contact us at returns@diffuserworld.com 855-276-6277 x3.

AROMA-SPA™

  • Quick Clean: This is a vaporizer, so it needs to be cleaned by hand. Wipe out the bowl with rubbing alcohol on a cloth. Wipe the disc at the bottom with a Q-Tip. Clean between uses as mineral deposits can collect there. It is an all-in-one unit and cannot go through the dishwasher.
  • Warnings: Do not set on any surface that can be damaged by essential oils. Only use in an upright position. If you feel the diffuser needs to be repaired, please refer to our RMA instructions or contact us at returns@diffuserworld.com 855-276-6277 x3.

AROMA-CRYSTAL™ USB DIFFUSER

There are three things to be aware of when operating the USB diffuser. Do not run carrier oils or any blends if possible. The Piezo crystal screens are micro-small and can have trouble with high viscosity oils. As a rule of thumb, oils like or similar to lemon, lavender and peppermint are just fine. If the USB has stopped due to thick oils, use a cotton Q-Tip with alcohol to clean both sides of the screen. And lastly, if it doesn't seem to be putting the oil through and the user is using the correct oils, then use a Q-Tip and press down on the screen from the top with some force to make sure it has not been pushed up from the bottom where the bottle is placed. We have found that when users put the bottle in the cartridge, they are pressing down with too much force and it is bending the screen upward. Once they release the bottle and put the cover on, the bottle will pull back slightly and will not maintain contact with the Piezo crystal screen. Once the screen regains contact, it should start diffusing again like a champ. If you feel the diffuser needs to be repaired, please refer to our RMA instructions or contact us at returns@diffuserworld.com 855-276-6277 x3.

Warranty and Life Expectancy

Warranty Periods by Product

  • Aroma-Ace™: 30-Day Satisfaction Guaranty / Five Year Warranty on Manufacturer Defects. Warranty Exceptions: Use of a 110V unit on a 220V system. Tipping unit back with oil attached causing oil to run into the pump. We can repair for $30.00.
  • Aroma-Whisper™: 30-Day Satisfaction Guaranty / One Year Warranty
  • Aroma-Breeze™: 30-Day Satisfaction Guaranty / One Year Warranty
  • Aroma-Pro™: 30-Day Satisfaction Guaranty / One Year Warranty
  • Scent Master 5000™: 30-Day Satisfaction Guaranty / One Year Warranty
  • Aroma-Globe™: 30-Day Satisfaction Guaranty / 90-Day Warranty
  • Aroma-Spa™: 30-Day Satisfaction Guaranty / 6 Month Warranty
  • Aroma-Crystal™: 30-Day Satisfaction Guaranty / 90-Day Warranty
  • Aroma-Sidekick™: 30-Day Satisfaction Guaranty / 90-Day Warranty

Life Expectancy: Diffuser World pumps, atomizer attachments, machined wells and glass will provide several years of service if kept clean and properly maintained. Contact returns@diffuserworld.com for additional help, or call 855-276-6277 x3.

Troubleshooting Guide

Making a Loud Noise:  Try running the following tests to either resolve the problem or give us a better idea how to best resolve your specific issue:

  1. Clean: You may have an oil clog. Follow the Quick-Clean and Deep-Clean instructions in the Cleaning Guide.
  2. Extra Atomizer Attachment: Try using the extra atomizer attachment you received (Aroma-Ace™ & Aroma-Whisper™) to see if you get a better result. If that solves your problem we can send you a replacement atomizer attachment.
  3. Pump Test: To run a quick pump test, plug in the unit and adjust to MAX output. Remove the atomizer attachment (it will be loud). Place your finger over the hole. Is it building up back pressure? If so, the pump should be fine. If not, your pump may need to be repaired. Start RMA process.
  4. Leaking Oil: Check to see if there is oil coming out of the unit through the seams, feet or plug areas. If so, immediately discontinue use. The unit needs to be repaired. Start RMA process. Contact returns@diffuserworld.com for additional help, or call 855-276-6277 x3.
Little or no vapor output:  If your atomizing diffuser is not putting out the usual amount of vapor, try running the following tests to either resolve the problem or give us a better idea how to best resolve your specific issue:
  1. Clean: You may have an oil clog. Follow the Quick-Clean and Deep-Clean instructions in the Cleaning Guide.
  2. Extra Atomizer Attachment: Try using the extra atomizer attachment you received (Aroma-Ace™ & Aroma-Whisper™) to see if you get a different result. If that solves your problem we can send you a replacement atomizer attachment.
  3. Pump Test: To run a quick pump test, plug in the unit and adjust to MAX output. Remove the atomizer attachment (it will be loud). Place your finger over the hole. Is it building up back pressure? If so, the pump should be fine. If not, your pump may need to be repaired. Start RMA process.
  4. Leaking Oil: Check to see if there is oil coming out of the unit through the seams, feet or plug areas. If so, immediately discontinue use. The unit needs to be repaired. Start RMA process. Contact returns@diffuserworld.com for additional help, or call 855-276-6277 x3. Contact returns@diffuserworld.com for additional help, or call 855-276-6277 x3.

Pump malfunction: If your atomizing diffuser's pump doesn't seem to be working, try running the following tests to either resolve the problem or give us a better idea how to best resolve your specific issue:

  1. Clean:  You may have an oil clog. Follow the Quick-Clean and Deep-Clean instructions in the Cleaning Guide.
  2. Extra Atomizer Attachment: Try using the extra atomizer attachment you received (Aroma-Ace™ & Aroma-Whisper™) to see if you get a different result. If that solves your problem we can send you a replacement atomizer attachment.
  3. Pump Test: To run a quick pump test, plug in the unit and adjust to MAX output. Remove the atomizer attachment (it will be loud). Place your finger over the hole. Is it building up back pressure? If so, the pump should be fine. If not, your pump may need to be repaired. Start RMA process.
  4. Leaking Oil: Check to see if there is oil coming out of the unit through the seams, feet or plug areas. If so, immediately discontinue use. The unit needs to be repaired. Start RMA process. Contact returns@diffuserworld.com for additional help, or call 855-276-6277 x3.

Leaking or spitting oil: If there is oil coming out of the unit through the seams, feet, socket or plug areas, then immediately discontinue use. This is usually caused by the unit being tipped with an essential oil bottle attached and oil running into the pump. The unit needs to be repaired. Start RMA process. Contact returns@diffuserworld.com for additional help, or call 855-276-6277 x3.

Atomizer Tilted: If your atomizer will not click into the socket or slowly turns to a tilt position as the diffuser runs, try running the following tests to either resolve the problem or give us a better idea how to best resolve your specific issue:

  1. Clean:  You may have an oil build up. Follow the Quick-Clean and Deep-Clean instructions in the Cleaning Guide.
  2. Extra Atomizer Attachment: Try using the extra atomizer attachment you received to see if you get a different result. If that solves your problem we can send you a replacement atomizer attachment. If not, start the RMA process. Contact returns@diffuserworld.com for additional help, or call 855-276-6277 x3.

Atomizer Straw Removed: Do not remove the pick-up straw from the atomizer because it is attached by machine during the assembly at the factory and it CANNOT be re-attached by hand. If your pick-up straw has detached, we can send you a replacement atomizer attachment under your warranty. If it is passed your warranty period, you can purchase the complete atomizer attachment (set of three) on the website. Contact returns@diffuserworld.com for additional help, or call 855-276-6277 x3.

USB Clogged: There are three things to be aware of when operating the USB diffuser. Do not run carrier oils or any blends if possible. The Piezo crystal screens are micro-small and can have trouble with high viscosity oils. As a rule of thumb, oils like or similar to lemon, lavender and peppermint are just fine. If the USB has stopped due to thick oils, use a cotton cue tip with alcohol to clean both sides of the screen. And lastly, if it doesn't seem to be putting the oil through and the user is using the correct oils, then use a Q-tip and press down on the screen from the top with some force to make sure it has not been pushed up from the bottom where the bottle is placed. We have found that when users put the bottle in the cartridge, they are pressing down with too much force and it is bending the screen upward. Once they release the bottle and put the cover on, the bottle will pull back slightly and will not maintain contact with the Piezo crystal screen. Once the screen regains contact, it should start diffusing again like a champ. Contact returns@diffuserworld.com for additional help, or call 855-276-6277 x3.

RMA - Repair and Return Procedures

Step By Step Instructions

  • Request a RMA form and RMA number from Diffuser World via email returns@diffuserworld.
  • A copy of the completed RMA Request must be included in your shipment to Diffuser World.
  • Include all of the original pieces and parts, including all atomizers, and original packaging (if available).
  • Please detach the atomizer from the unit and do not include any oil.
  • Mail to Diffuser World Inc, Attention: Returns Department, 4219 N Hwy 91, Enoch UT 84721. Shipping fees are the responsibility of the sender.
  • Contact returns@diffuserworld.com for additional help, or call 855-276-6277 x3.

Returns With 30-Day Satisfaction Guaranty

If for any reason you are not completely satisfied with your Diffuser World purchase, simply begin the RMA process within 30 days of the purchase for a full refund of the purchase price. Shipping and discounts at time of purchase are not refundable. Shipping charges for all returns are the responsibility of the customer. Contact returns@diffuserworld.com for additional questions.

All Returns are Subject to:

  • Diffuser World must approve ALL returns by issuing an RMA number. NO returns are accepted without a completed form.
  • To obtain an RMA number, you must fill out and submit the RMA Request Form.
  • The RMA request must be completed within 30 days of the purchase date. No returns are allowed after 30 days (except for Repair or Warranty).
  • Shipping charges for all returns will be the responsibility of the customer unless it is determined by Diffuser World that a manufacturers defect or deficiency exist through no fault of the customer. At that time a shipping label will be emailed to the customer.
  • Return shipments should be sent with confirmations or tracking numbers. Diffuserworld.com claims no responsibility for missing shipments. Any damages that occur during return shipment are the responsibility of the customer.
  • All returns expecting a refund must have non-damaged packaging (preferably unopened) and be in resalable condition, containing all original contents (instruction manuals, spare parts, electrical cords, accessories etc.) otherwise, a restocking fee will be assessed. Merchandise that has been excessively used or show any signs of abuse cannot be returned for refund or exchange. Contact returns@diffuserworld.com for additional help, or call 855-276-6277 x3.

Repairs Under Warranty: We go to great lengths to ensure that your order is correct, properly packaged, and well protected. Despite our best efforts, damage sometimes occurs during transit. If any of your items are damaged or not working upon arrival please begin the RMA process. Shipping charges for all returns are the responsibility of the customer. Contact returns@diffuserworld.com for additional help.

All Returns are Subject to:

  • Diffuser World must approve ALL returns by issuing an RMA number. NO returns are accepted without a completed form.
  • To obtain an RMA number, you must fill out and submit the RMA Request Form.
  • Shipping charges for all returns will be the responsibility of the customer unless it is determined by Diffuser World that a manufacturers defect or deficiency exist through no fault of the customer. At that time a shipping label will be emailed to the customer.
  • Return shipments should be sent with confirmations or tracking numbers. Diffuserworld.com claims no responsibility for missing shipments. Any damages that occur during return shipment are the responsibility of the customer.
  • All returns expecting a refund must have non-damaged packaging (preferably unopened) and be in resalable condition, containing all original contents (instruction manuals, spare parts, electrical cords, accessories etc.) otherwise, a restocking fee will be assessed. Merchandise that has been excessively used or show any signs of abuse cannot be returned for refund or exchange. Contact returns@diffuserworld.com for additional help, or call 855-276-6277 x3.

Repairs with Expired Warranty: Diffuser World can repair products even past the warranty period. Simply begin the RMA process. The repair will be subject to a $30 repair fee. You can pay through the online Shopping Cart (and include a copy of the receipt) or include a check for the same written to Diffuser World in the return package. Shipping charges for all returns are the responsibility of the customer. Contact returns@diffuserworld.com for additional help.

All Returns are Subject to:

  • Diffuser World must approve ALL returns by issuing an RMA number. NO returns are accepted without a completed form.
  • To obtain an RMA number, you must fill out and submit the RMA Request Form.
  • Shipping charges for all returns will be the responsibility of the customer unless it is determined by Diffuser World that a manufacturers defect or deficiency exist through no fault of the customer. At that time a shipping label will be emailed to the customer.
  • Return shipments should be sent with confirmations or tracking numbers. Diffuserworld.com claims no responsibility for missing shipments. Any damages that occur during return shipment are the responsibility of the customer.
  • All returns expecting a refund must have non-damaged packaging (preferably unopened) and be in resalable condition, containing all original contents (instruction manuals, spare parts, electrical cords, accessories etc.) otherwise, a restocking fee will be assessed. Merchandise that has been excessively used or show any signs of abuse cannot be returned for refund or exchange. Contact returns@diffuserworld.com for additional help, or call 855-276-6277 x3.

Returned Merchandise Credits: REFUNDS AND CREDITS CAN ONLY BE CONSIDERED FOR PRODUCT PURCHASED DIRECTLY FROM DIFFUSER WORLD. Credit will be evaluated for each returned item individually. When an item is received it will be processed by the returns department within five business days. Returns for credit will be inspected upon receipt. After inspection the eligible refund will be credited. Returns for exchanges will be inspected upon receipt. After inspection of the item the eligible refund amount will be applied towards a new order. If you received your item as a gift and you want to return it you must have the original order number and name. Eligible refunds will be credited to the same card that was used to make the purchase refunds being issued to expired credit cards will be issued as a company check. Contact returns@diffuserworld.com for additional help. Contact returns@diffuserworld.com for additional help, or call 855-276-6277 x3.

Damaged Packages: We inspect all merchandise both visually and functionally before we ship it. In the rare event that your merchandise is defective upon receipt, it can be handled in one of the following ways:

  • "Out of the box" visual defects or malfunctions must be reported within two business days of delivery, otherwise a return or exchange would be subject to the standard return shipping fees.
  • Functional defects that occur after the initial use must be reported before the warranty expires. Diffuser World Technicians will determine the cause and any or all action to be taken.
  • Eligible orders will be repaired or reshipped as necessary, item specific delays may apply.
  • The repaired or replaced items will ship using the most economical shipping method unless the customer requests and pays for expedited shipping. Contact returns@diffuserworld.com for additional help, or call 855-276-6277 x3.